News of December, 2022

VRC EXTREME RACING COMPLEX TRACK XTR LT RELEASED

19.12.2022   3 comments   Category: Site news

image

The new XTR Long Track 1 has been published to day. This track will host the 2022 VRC Worlds 1:8 Nitro Sportscars which will start Wednesday Dec. 21st. The XTR track is part of the VRC Extreme Racing Complex (V.E.R.C.) which also features the Super Speedway oval, short and long courses, and the VRC Dirt oval and long and short courses.

The XTR track features a unique crossing which has opened up a number of special layouts, 5 long tracks, 6 medium tracks, 3 short tracks and 4 oval tracks! These tracks will be released in 2023 and will soon become part of the VRC Pro 2023 racing calendar for 1:8 and 1:10 nitro on-road racing.

STEAM
A XTR Long Tracks pack of 5 (DLC) will be available on STEAM by December 20st. This DLC will contain LT1, the other 4 Long Tracks will become available automatically as soon as they are ready to be released! The availability of XTR LT1 on STEAM will enable Steam members to participate in the 2023 VRC Worlds race!

BUMP-UP SYSTEM ISSUES CORRECTED

19.12.2022   5 comments   Category: Site news

There were some issues reported related to the Bump-up system used for all classes of the 2022 VRC Worlds modified classes. These issues were related to how the bump-up system was configured for these Worlds events. After consultation with the developer who programmed the bump-up system (many years ago...) I have now been able to correct the settings for all events which had the semi-finals start today or later.

The affected 2022 Worlds events are:
2022 VRC WORLDS 1:8 RALLY-X
2022 VRC WORLDS 1:12 ELECTRIC SPORTSCARS
2022 VRC WORLDS 1:10 NITRO SEDANS
2022 VRC OVAL WORLDS 1:10 ELECTRIC NASCAR TRUCKS
2022 VRC DIRT OVAL WORLDS 1:10 SC TRUCKS
2022 VRC DIRT OVAL WORLDS ELECTRIC BUGGIES

I sincerely apologize for this mistake, especially to racers whose results may have been affected. These structures are quite complex and as this was the first time the Bump-up system was used throughout the current Worlds events a small configuration error is easily made. I have taken measures to make sure this mistake ... read more

2022 VRC WORLDS 1:8 ONROAD SCHEDULE CHANGES

11.12.2022   0 comments   Category: Site news

image

The 1:8 nitro sportscars and GT3 events have been changed around.

1:8 Nitro GT3 will start on Dec. 14th and will be raced on Luxembourg.
1:8 Nitro Sportscars will start on Dec. 21st and will be raced on e'XTR'eme LT1 (Long Track 1).

The current version of XTR LT1 has been set inactive as of this morning. All results incl. time trial results will be disregarded when the final version of XTR LT1 will be released. We expect to release the final version of XTR LT1 on Friday December 16th.

Note: if XTR LT1 was the last one you raced on you will be informed at next start-up of VRC Pro that the sim will start in default mode.

1:8 NITRO ON-ROAD RACING TO GO 2023 LEVEL

09.12.2022   6 comments   Category: Site news

image

In the past months I have been working on updating the chassis to 2023 IFMAR/EFRA technical rules, with lower weight at 2350 grams and with the reduced weight also come lower yaw, pitch and roll inertias. This makes the chassis a lot more responsive. Since 2010 a lot of rotating weight has been saved with the use of lighter materials like graphite, titanium and ultra-light CNC machined parts which has resulted in lower inertias of all the rotating transmission parts in the car. This has a noticeable effect on acceleration. The 2-speed gear/pinion range will be extended to reach significant higher top speeds on long tracks like XTR, Lostallo and Melzo.

Also a lot of work has been done on the XTEC .21 engine and much progress is made with torque and raw power, even now running with 16% nitro. This is achieved by carefully adjust several key engine parameters which affect timing and combustion, more or less as what's done with real engines. Our physics model of the nitro engine contains over 60 performance re... read more

NEW XTR LT1 VERSION UP

07.12.2022   29 comments   Category: Site news

image

Thanks to all racers who have participated in the 2 test events for the XTR LT1 track!

Now that the test events are over we have released a new scaled-up version (125%) of XTR LT. This brings the track width to around 4m which is what you would expect.

Pls. continue testing this new version and report your findings in the Comments section below this news item.

Known issue:
- ignore corner cutting warnings for now, we are working on an update of the segments map
- pit table objects are stretched
- start positions normal direction 3-10 require adjustments

We will continue to do updates and inform you in the comments section below.

9Turbo RX6.1 RC USB ADAPTOR 12-BIT RELEASED

06.12.2022   0 comments   Category: Site news

image

This week we will receive the first batch of the updated 9Turbo RX6.1 RC USB adaptor.

The RX6.1 use the same hardware as the RX6.0 but has newly developed firmware to support all modern 2.4 Ghz transmitter systems including older and slower AM/FM transmitter/receiver/servo combinations and first generation 2.4Ghz transmitter/receiver combinations.

We have released 3 new adaptor products with 1, 3 and 12 months All-Inclusive subscription included. Check them out at https://www.vrcworld.com/eshop/products.aspx?hw

All pending orders for the RX6.0 will automatically be shipped with the new RX6.1 adaptor, starting end of this week.

News by month

October, 2024   (4)
September, 2024   (3)
August, 2024   (1)
July, 2024   (1)
June, 2024   (6)
May, 2024   (1)
April, 2024   (3)
March, 2024   (2)
January, 2024   (2)
December, 2023   (19)
November, 2023   (9)
October, 2023   (3)
June, 2023   (3)
May, 2023   (2)
April, 2023   (1)
March, 2023   (2)
February, 2023   (9)
January, 2023   (5)
December, 2022   (6)
November, 2022   (2)
October, 2022   (1)
September, 2022   (1)
July, 2022   (2)
May, 2022   (6)
April, 2022   (4)
March, 2022   (4)
February, 2022   (4)
January, 2022   (6)
December, 2021   (4)
October, 2021   (2)
June, 2021   (1)
May, 2021   (1)
January, 2021   (1)
December, 2020   (1)
November, 2020   (2)
July, 2020   (3)
June, 2020   (2)
May, 2020   (1)
April, 2020   (3)
March, 2020   (1)
February, 2020   (2)
January, 2020   (2)
November, 2019   (1)
September, 2019   (4)
July, 2019   (1)
June, 2019   (1)
May, 2019   (2)
April, 2019   (1)
March, 2019   (1)
February, 2019   (4)
January, 2019   (10)
December, 2018   (5)
November, 2018   (3)
October, 2018   (2)
September, 2018   (2)
August, 2018   (3)
June, 2018   (4)
May, 2018   (1)
April, 2018   (3)
February, 2018   (1)
January, 2018   (8)
December, 2017   (17)
November, 2017   (6)
October, 2017   (12)
September, 2017   (11)
August, 2017   (9)
July, 2017   (2)
June, 2017   (9)
May, 2017   (5)
April, 2017   (7)
March, 2017   (10)
February, 2017   (8)
January, 2017   (10)
December, 2016   (13)
November, 2016   (9)
October, 2016   (3)
September, 2016   (4)
August, 2016   (2)
July, 2016   (1)
June, 2016   (3)
May, 2016   (6)
April, 2016   (4)
March, 2016   (20)
February, 2016   (34)
January, 2016   (4)
December, 2015   (2)
November, 2015   (5)
October, 2015   (5)
September, 2015   (1)
July, 2015   (4)
June, 2015   (6)
April, 2015   (4)
March, 2015   (5)
February, 2015   (6)
January, 2015   (9)
December, 2014   (11)
November, 2014   (3)
October, 2014   (9)
September, 2014   (3)
August, 2014   (4)
July, 2014   (2)
May, 2014   (4)
April, 2014   (7)
March, 2014   (2)
February, 2014   (3)
January, 2014   (9)
December, 2013   (14)
November, 2013   (5)
October, 2013   (9)
September, 2013   (5)
August, 2013   (5)
July, 2013   (7)
June, 2013   (7)
May, 2013   (6)
April, 2013   (5)
March, 2013   (2)
February, 2013   (2)
January, 2013   (6)
December, 2012   (10)
November, 2012   (5)
October, 2012   (4)
September, 2012   (2)
August, 2012   (4)
July, 2012   (4)
June, 2012   (2)
May, 2012   (2)
April, 2012   (1)
March, 2012   (2)
February, 2012   (3)
January, 2012   (4)
December, 2011   (7)
November, 2011   (2)
October, 2011   (3)
September, 2011   (3)
July, 2011   (1)
June, 2011   (1)
May, 2011   (2)
BANNER

BANNER

BANNER

BANNER
To advertise click here
Translate

Share on Facebook

Share on Twitter